manualshive.com logo in svg

NETGEAR ProSafe 7000, Руководство по администрированию программного обеспечения, Страница: 399 / 562

Поделиться
Скачать
NETGEAR ProSafe 7000 Скачать руководство пользователя страница 399

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3

21-5

Double VLANs

v1.0, June 2010

3.

Change the Port VLAN ID (PVID) of port 24 to 200:

a.

From the main menu, select Switching > VLAN > Advanced > Port PVID Configuration. A screen 
similar to the following displays.

Figure

 

21-4

b.

Under PVID Configuration, scroll down to interface 1/0/24 and select the chechbox for that 
interface. Now 1/0/24 appears in the Interface field at the top.

c.

Under PVID Configuration, in the PVID (1 to 4093) field, enter 

200

.

d.

Click 

Apply

 to save the settings.

4.

Configure port 48 as the provider service port:

a.

From the main menu, select Switching > VLAN > Advanced > Port DVLAN Configuration. A 

Содержание ProSafe 7000



















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов