NETGEAR Orbi LBR1020 Скачать руководство пользователя

Страница: 143 / 171

3. If the Power LED on the back of the satellite does not light and if satellite has a Power

On/Off button, press the Power On/Off button.

4. Wait about two minutes for the satellite ring LED to light solid white.

5. Press the Sync button on the back of the satellite and within two minutes, press the

Sync button on the back of your router.
The satellite ring LED pulses white, then lights one of the following colors for about
three minutes, and then turns off:

•

Blue. The router and satellite successfully synced, and the connection between
the router and satellite is good.

•

Amber. The router and satellite failed to sync. Move the satellite closer to the
router. and try again.

You can use the router web interface to add a satellite to your Orbi network.

To add a satellite to your Orbi network using the router web interface:

1. Launch a web browser from a computer or mobile device that is connected to your

Orbi network.

2. Enter orbilogin.com.

A login window opens.

3. Enter the router admin user name and password.

The user name is admin. The default password is password. The user name and
password are case-sensitive.

The BASIC Home page displays.

4. Select Add Orbi Satellite.

The Place Your Satellite page displays.

5. Follow the instructions about where to place your satellite in your house.

6. Connect the satellite to a power source.

7. If the Power LED on the back of the satellite does not light and if satellite has a Power

On/Off button, press the Power On/Off button.

8. Click the NEXT button.

9. Wait about two minutes for the satellite’s ring LED to light solid white.

User Manual

143

Set Up and Manage an Optional
Orbi Satellite

Orbi 4GX Router Model LBR1020

Содержание Orbi LBR1020












































































































































































Результаты поиска

Содержание Orbi LBR1020

Отзывы:

Похожие инструкции для Orbi LBR1020

Бренды по названию

Популярные бренды

NETGEAR Orbi LBR1020, Руководство пользователя

Результаты поиска

Содержание Orbi LBR1020

Отзывы:

Похожие инструкции для Orbi LBR1020

Бренды по названию

Популярные бренды