NETGEAR MR314 - Wireless Router, Справочное руководство

Страница: 63 / 114

Reference Guide for the Model MR314 Cable/DSL Wireless Router
Advanced Configuration of the Router 5-7
RTS Threshold Request To Send Threshold: The threshold (number of bytes) for
enabling RTS/CTS handshake. Packets with frame size larger than this
value will perform the RTS/CTS handshake. Setting this field to be larger
than the maximum MSDU (MAC service data unit) size will turn off the
RTS/CTS handshake. Setting this field to zero will turn on the RTS/CTS
handshake. The default value for RTS Threshold is 2432. To change this
value, uncheck the Default box and enter a value between 0 and 2432.
Fragment Threshold Packets larger than the size specified in this field will be fragmented and
transmitted in fragments of a size not exceeding this value. The
Fragment Threshold value must be larger than RTS Threshold value.
The default value for RTS Threshold is 2432. To change this value,
uncheck the Default box and enter a value between 256 and 2432.
WEP Configuration
WEP Encryption Select the WEP (Wired Equivalent Privacy) Encryption level:
• Disabled (Open System)
• 64-bit (sometimes called 40-bit) encryption
• 128-bit encryption
WEP Key Generator
Passphrase
If WEP is enabled, you can generate the four data encryption keys by
entering a word or group of printable characters, and clicking Create.
Key1 to Key4
(Manual Entry) If WEP is enabled, you can manually program the four data encryption
keys. These values must be identical on all PCs and Access Points in
your network. Enter ten hexadecimal digits (any combination of 0-9, a-f,
or A-F)
Note: If you are configuring the router from a wireless PC and you change the router’s
ESSID or WEP settings, you will lose your wireless connection when you click on
Apply. You must then change the wireless settings of your PC to match the router’s new
settings.
Table 5-4. Wireless LAN Setup Fields (continued)
Field Description