NETGEAR ME102 - Wireless Access Point, Справочное руководство

Страница: 9 / 31

Additionally, the ME102 Wireless Access Point supports the following wireless features:
Distributed coordinated function (CSMA/CA, Back off procedure, ACK procedure, retransmission of
unacknowledged frames
RTS/CTS handshake
Duplicate detection and Recovery
Beacon generation
Fragmentation and reassembly
Authentication Algorithm (Open System, Shared Key)
Short or long preamble
Roaming among access points on the same subnet
LED Indicators
The
ME102 802.11b Wireless Access Point
provides three status LEDs: Power(Yellow), Ethernet
Link/Activity(Green) and Wireless Link/Activity(Yellow).
LED Status Description
Off No Power
Power
On Power On
Off Indicates no Ethernet link detected
Green On 10 Mbps Ethernet link detected but no
activity
Ethernet
(Link/Activity)
Green Blink Indicates data traffic on the 100 Mbps
LAN
Off Indicates no wireless link
Wireless
(Link/Activity)
Fast Blink Indicates the ME102 is transmitting or
receiving data through wireless links
System Requirements
Before installing the ME102, make sure of you meet the following requirements:
A 10 Mbps port of a Local Area Network device such as hub or switch ♦
♦
♦
♦
♦
A Category 3 or 5 UTP Ethernet cable with RJ-45 connector
An A/C Power outlet (100-240 V, 50-60 HZ)
One computer with USB support and Ethernet connection
Windows 98, Millennium, 2000, or XP
6