Configure Using Ethernet/Wireless Port
The installation below illustrates the Wireless Access Point configuration through its Ethernet/Wireless
interface from a connected PC.
Installing SNMP Configuration Utility
The access point SNMP configuration utility enables you to modify the various configurable parameters of
the access point. This utility must be running Windows 98, Windows Millennium, Windows 2000 or
Windows XP. The following steps illustrate the installation of the utility in Windows 98.
1.
Insert the ME102 Wireless Access Point Resource CD into the CD-ROM drive. From the Windows
98 desktop, double-click on
My Computer. Double-click on the CD-ROM drive to look into the
content of the CD. Double-click on the
SNMPMANG folder. Windows displays all of the files in the
\SNMPMANG directory of the CD.
2.
Double-click on the
SETUP application icon to start the installation procedure. The InstallShields
Wizard opens. Click on “Next” to continue.
3.
Click on “Browse” to change the destination location where the Access Point SNMP utility is
installed. Otherwise, click on “Next” to continue.
4.
Modify the “Program Folders” entry field if desired. Click on “Next” to continue. InstallShields
starts copying files into your system.
5.
Click on “Finish” to complete the installation of the access point SNMP utility.
Configuring Access Point with ME102 SNMP Manager
The ME102 SNMP Manager allows you to further customize the ME102 Wireless Access Point and your
wireless network through the Ethernet or wireless.
From the Windows desktop, select
Start
⇒
Program
⇒
NETGEAR ME102 AP
⇒
Access Point SNMP
Manager. The SNMP Manager main window displays the name and IP address of the accessible ME102
Wireless Access Points.
18
Содержание ME102 - Wireless Access Point
Страница 1: ......
