NETGEAR JR6150 Скачать руководство пользователя

Страница: 97 / 159

Administration

A750 Wireless Dual Band Gigabit Router JR6150

Default Gateway

. The IP address for the default gateway that the router

communicates with.

DHCP Server

. The IP address for the Dynamic Host Configuration Protocol

server that configures the TCP/IP for all the computers that are connected to the
router.

DNS Server

. The IP address of the Domain Name Service server that translates

of network names to IP addresses.

Lease Obtained

. The date and time when the lease was obtained.

Lease Expires

. The date and time that the lease expires.

Choose any of the following actions:

To release the router’s IP address and terminate the Internet connection, click

the

Release

button.

To let the router acquire an IP address from the DHCP server and start the

Internet connection, click the

Renew

button.

To close the Connection Status screen, click the

Close Window

button.

The content of the Connection Status pop-up screen depends on the type of connection.

•

PPPoE connection

The

Connect

and

Disconnect

buttons in the Connection Status screen display only

when the connection mode is Manually Connect.

The following information displays for a PPPoE connection:

•

Connection Time

. The time that elapsed since the connection was established.

•

Connection Status

. The status of the connection: Connected, Disconnected,

Negotiation (---, Success), or Authentication (---, Success). --- indicates failure.

•

IP Address

. The IP address that is assigned to the router.

•

Subnet Mask

. The subnet mask that is assigned to the router.

Choose any of the following actions:

To establish the PPPoE connection manually, click the

Connect

button.

To terminate the PPPoE connection manually, click the

Disconnect

button.

To close the Connection Status screen, click the

Close Window

button.

The content of the Connection Status pop-up screen depends on the type of connection.

•

PPTP connection

The

Connect

and

Disconnect

buttons in the Connection Status screen display only

when the connection mode is Manually Connect.

The following information displays for a PPTP connection:

•

Connection Status

. The status of the connection: Connected or Disconnected.

•

IP Address

. The IP address that is assigned to the router.

•

Subnet Mask

. The subnet mask that is assigned to the router.

Содержание JR6150
































































































































































Результаты поиска

Содержание JR6150

Отзывы:

Похожие инструкции для JR6150

Бренды по названию

Популярные бренды

NETGEAR JR6150, Руководство пользователя

Результаты поиска

Содержание JR6150

Отзывы:

Похожие инструкции для JR6150

Бренды по названию

Популярные бренды