Get Started
12
AC1200 WiFi Range
Extenders
•
If the Device Link LED is solid green or amber, your extended WiFi network
reaches the area with a poor router WiFi signal and your network setup is
complete.
•
If the Device Link LED is red, your extended WiFi network does not reach the area
with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device Link LED turns solid green or amber.
10.
Repeat Steps 1–9 to install the second extender.
Connect With the NETGEAR Installation Assistant
You can use a web browser to log in to the extenders and use the NETGEAR installation
assistant set up their WiFi connection to your existing WiFi router.
To use a web browser to connect the extender to your WiFi router:
1.
Use a WiFi network manager on a computer or WiFi device to find and connect to the
extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED
lights.
2.
Launch web browser.
3.
Enter
www.mywifiext.net
in the address field of the browser.
The New Extender Setup page displays.
4.
Click the
NEW EXTENDER SETUP
button.
The first time that you log in to the extender, the Create Account page displays. If the
Create Account page does not display, visit
www.mywifiext.net
.
5.
Complete the fields on the Create Account page and click the
NEXT
button.
