Reference Manual for the Model DM602 ADSL Modem
5-2
Advanced Configuration of the Modem
This screen shows the following parameters:
Table 5-1.
Router Status Fields
Field
Description
Firmware Version
This field displays the modem firmware version.
LAN Port
These IP parameters apply to the Local Area Network (LAN) of the
modem.
MAC Address
This field displays the Ethernet MAC address being used by the LAN
port of the modem.
IP Address
This field displays the IP address being used by the ADSL (WAN) port of
the modem. If no address is shown, the modem cannot connect to the
Internet.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the ADSL(WAN)
port of the modem.
Modem
These parameters apply to the ADSL modem section of the modem.
ADSL Firmware Version
This field displays the ADSL chipset firmware version.
Modem Status
This field displays the state of the ADSL connection to your service
provider, either “Connecting” or “Connected”
Connect Mode
This field displays the protocol used to connect to your service provider.
When the ADSL link comes up, the connection will be either “Fast” or
“Interleaved”, depending on the way the telephone company has
configured its equipment
Down Stream
This field displays the connection rate from the service provider to the
modem in bits per second
Up Stream
This field displays the connection rate from the modem to the service
provider in bits per second
VPI
This field displays the VPI entered in the Setup Wizard or Basic Settings
screen
VCI
This field displays the VCI entered in the Setup Wizard or Basic Settings
screen
DM602.book Page 2 Friday, October 4, 2002 4:22 PM