manualshive.com logo in svg

NETGEAR DGND3800B, Руководство пользователя

Поделиться
Скачать
NETGEAR DGND3800B Скачать руководство пользователя страница 78

Advanced Settings

78

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B 

Note:  

For security reasons, you should avoid using the default DMZ server 

feature. When a computer is designated as the default DMZ server, 
it loses much of the protection of the firewall and is exposed to many 
exploits from the Internet. If compromised, the computer can be 
used to attack your network.

Incoming traffic from the Internet is usually discarded by the modem router unless the traffic 
is a response to one of your local computers or a service that you have configured in the 
Ports screen. Instead of discarding this traffic, you can have it forwarded to one computer on 
your network. This computer is called the default DMZ server.

To assign a computer or server to be a default DMZ server: 

1. 

In the 

WAN Setup 

screen, select the 

Default DMZ Server

 check box.

2. 

Type the IP address for that server and click 

Apply

. 

Respond to Ping on Internet Port

If you want the modem router to respond to a ping from the Internet, select this check box. 
This should be used only as a diagnostic tool, because it allows your modem router to be 
discovered, which can be a security problem. Do not select this check box unless you have a 
specific reason to do so.

MTU Size (in bytes)

The normal maximum transmission unit (MTU) value for most Ethernet networks is 1500 
bytes, 1492 bytes for PPPoE connections, and 1458 for PPPoA connections. For some ISPs 
you might need to reduce the MTU. But this is rarely required, and should not be done unless 
you are sure it is necessary for your ISP connection.

Содержание DGND3800B
















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды