NETGEAR DGND3800B Скачать руководство пользователя

Страница: 53 / 175

Content Filtering

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

To delete all the log entries, click

Clear Log

To see the most recent access attempts, click

Refresh

To send the log file to your e-mail account, click

Send Log

. This feature is useful for

testing your e-mail settings.

Use the Include in Log check boxes to determine which events are included in the log.

Selecting all check boxes increases the size of the log, so it is good practice to disable any

events that are not really required.

•

Attempted access to blocked sites

. If selected, attempted Internet accesses that

were blocked are logged.

•

Connections to the Web-based interface of this Router

. If selected, connections

are logged to this router, rather than through this router to the Internet.

•

Router operation

. If selected, router operations not covered by the preceding

selections are logged.

•

Known DoS attacks and Port Scans

. If selected, denial of service attacks, as well

as port scans, are logged.

The logs can be sent to a syslog server. Enable one of the three options in the Syslog

section, as required:

•

Disable

. Select this if you do not have a syslog server.

•

Broadcast on LAN

. The syslog data is broadcast rather than sent to a specific syslog

server. Use this if your syslog server does not have a fixed IP address.

•

Send to this Syslog server IP address

. If your syslog server has a fixed IP address,

select this option, and enter the IP address of your syslog server.

Click

Apply

to save your changes.

Содержание DGND3800B
















































































































































































Результаты поиска

Содержание DGND3800B

Отзывы:

Похожие инструкции для DGND3800B

Бренды по названию

Популярные бренды

NETGEAR DGND3800B, Руководство пользователя

Результаты поиска

Содержание DGND3800B

Отзывы:

Похожие инструкции для DGND3800B

Бренды по названию

Популярные бренды