NETGEAR DG824M - 802.11b Wireless ADSL Modem, Справочное руководство

Страница: 36 / 163

Reference Manual for the Model DG824M Wireless ADSL Modem Gateway
Connecting the Gateway to the Internet 3-15
If your ISP allows access from only one specific computer’s Ethernet MAC address, select
“Use this MAC address.” The gateway will then capture and use the MAC address of the
computer that you are now using. You must be using the one computer that is allowed by the
ISP. Otherwise, you can type in a MAC address.
Note: Some ISPs will register the Ethernet MAC address of the network interface card in your
PC when your account is first opened. They will then only accept traffic from the MAC
address of that PC. This feature allows your gateway to masquerade as that PC by using its
MAC address.
4.
Click on Apply to save your settings.
5.
Click on the Test button to test your Internet connection. If the NETGEAR website does not
appear within one minute, refer to
Chapter 8, “Troubleshooting” ”.
Wizard-Detected IP Over ATM Account Setup
If the Setup Wizard determines that your Internet service account uses IP Over ATM Classical IP
assignment (RFC1577), you will be directed to the menu shown in
Figure 3-13 below:
Figure 3-13: Setup Wizard menu for IP Over ATM (Classical IP) address
1.
Enter your assigned IP Address and Subnet Mask. This information should have been
provided to you by your ISP. You will need the configuration parameters from your ISP you
recorded in
“Record Your Internet Connection Information” on page 3-4 .
2.
Enter the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
DNS servers are required to perform the function of translating an Internet name such as
www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must
obtain DNS server addresses from your ISP and enter them manually here.
3.
Click on Apply to save the settings.