NETGEAR CG814WG V2, Справочное руководство

Страница: 89 / 122

Reference Manual for the Wireless Cable Modem Gateway CG814WG v2
Preparing Your Network to Work with a Router C-9
3. From the drop-down box, select your Ethernet adapter.
The window is updated to show your settings. They should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
Configuring Windows NT4, 2000 or XP for IP Networking
As part of the computer preparation process, you may need to install and configure TCP/IP on
each networked computer. Before starting, locate your Windows CD; you may need to insert it
during the TCP/IP installation process.
Installing or Verifying Windows Networking Components
To install or verify the necessary components for IP networking:
1. On the Windows taskbar, click the Start button, then click Control Panel.
2. Double-click the Network Connections icon.
3. If an Ethernet adapter is present in your computer, you should see an entry for Local Area
Connection. Double-click that entry.
4. Select Properties.
5. Verify that Client for Microsoft Networks and Internet Protocol (TCP/IP) are present. If not,
select Install and add them.
6. Select “Internet Protocol (TCP/IP)”, click Properties, and verify that “Obtain an IP address
automatically” is selected.
7. Click OK and close all Network and Dialup Connections windows.
8. Then, restart your computer.
TCP/IP Configuration Current NETGEAR Standard Previous NETGEAR Standard
Computer or workstation
IP Address
192.168.1.2 through
192.168.1.254 192.168.0.2 through
192.168.0.254
Subnet mask 255.255.255.0 255.255.255.0
Gateway address for router 192.168.1.1 default address 192.168.0.1 default address