Reference Manual for the Wireless Cable Modem Gateway CG814WG v2
Preparing Your Network to Work with a Router
C-15
3. Set the TCP/IP Properties.
The TCP/IP Properties dialog box displays.
a.
Click the IP Address
tab
.
b. Select the radio button marked
“Obtain an IP address from a DHCP server”.
c.
Click OK. This completes the configuration of
TCP/IP in Windows NT for this computer.
d. Restart the computer.
e.
Repeat these steps for each computer with this
version of Windows on your network.
Verifying TCP/IP Properties for Windows XP, 2000, and NT4
To check your computer’s TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type
cmd
and then click OK.
A command window opens.
3. Type
ipconfig /all
Your IP Configuration information is listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway.
4. Type
exit
TCP/IP Configuration
Current NETGEAR Standard Previous NETGEAR Standard
Computer or workstation
IP Address
192.168.1.2 through
192.168.1.254
192.168.0.2 through
192.168.0.254
Subnet mask
255.255.255.0
255.255.255.0
Gateway address for router
192.168.1.1 default address
192.168.0.1 default address
Содержание CG814WG V2
