DigiMano 2500
Netech Corporation
www.PressureMeter.com
Manual P/N DigiMano User-manual, Rev
3/19/2014
Erase Data
The data saved in the internal memory can be uploaded to the PC by following the
procedure. Setup the HyperTerminal or data capture software in the PC. Connect the
DigiMano 2500 to the PC using the standard 9 Pin Rs 232 cable. From the “Setup” Menu
select records by pressing F1 Key.
From the “Records” Menu select “Erase Records” by pressing
>
Key.
Records Menu
Select ((“SEL”) “Erase Records” by pressing F1. The following message will be
displayed, “warning that the data will be permanently deleted. Press F2 (“Yes”) to erase
the data.
Sel’
<
>
Exit
Erase Records
Set Capture Rate
Export Data
Pressure Control Settings
Records
Clock Settings
Back Light
Pressure Control Settings
Sel’
<
>
Exit
