User Manual DigiMano 2500
XVI
Data Capture
Measurement data can be saved to the internal memory as well as uploaded to the PC
through the RS 232 port at selected intervals for record keeping. To set the capture rate
follow the procedure.
The default capture rate setting is set to ‘Off’. To change the time intervals follow the
procedure below.
a.
From the main Menu select “Setp” by pressing F4.
b.
Select “Records” by pressing F1 (‘Sel’).
c.
Select “Set Capture Rate” by pressing F1.
d. The data capture rate can be selected from 0.5 Seconds to
15 Minutes or it can be turned off. Use the keys ‘
<
’ or ‘
>
’ for
increasing or decreasing or decreasing the capture rate.
The selections are 05 Seconds, 1 Seconds, 10 Seconds,
15 seconds, 30 Seconds, 1 Min, 5 Minutes, 10 Minutes and
15 Minutes
Connecting DigiMano to PC
DigiMano 2500 can be connected to a PC using a standard 9 pin RS 232 cable.
However those DigiMano 2500 units with the optional (Machine Setting) pressure control
relay output must use the optional serial Port interface adapter PN: 250-RS232-INTF)
and a standard serial RS232 cable.
Sel’
<
>
Exit
Set Capture Rate
OFF
