NetComm NWL-12-01, Руководство пользователя

Страница: 80 / 142

80
NetComm Wireless 3G Light Industrial M2M Router www.netcommwireless.com
Odometer
To access the Odometer screen, select the Services item from the top menu bar then the GPS item on the left. Finally, select the
Odometer menu item.
The GPS may be used to record the distance that the router has travelled. To do this, set the Odometer toggle key to the ON
position as in the screenshot below. You can toggle the unit of measurement by clicking the Display imperial / Display metric button.
The threshold setting adjusts the router’s sensitivity to movement so that movement within the specified radius from the starting
point does not register as distance travelled. When you have finished configuring the Odometer settings, click the Save button to
ensure the settings are stored on the router.
Figure 87 – Odometer options
ITEM DESCRIPTION
Odometer reading
The number of metres/kilometres that the device has travelled since the time listed in the Odometer
start time field.
Display imperial / Display
metric
Toggles the Odometer reading between metric and imperial measurements.
Odometer start time The time that recording of distance travelled began.
Reset odometer Resets the odometer reading to 0 and the Odometer start time to the current time.
Odometer Toggles the Odometer function on and off.
Threshold
Specifies the minimum distance that the router must travel from its current position before the
Odometer reading increases.
Table 18 - Odometer configuration options