NetComm NP5000 Скачать руководство пользователя страница 65

Страница: 65 / 76

Rev. 1 - YML667

www.netcomm.com.au

NP5000 Wireless Multi-Port Print Server User Guide

Page 65

Windows Printing Problems

Problem No. 1

When I tried to install the Printing software for Peer-to-Peer
printing, I received an error message and the installation was
aborted.

Solution No. 1

This may be caused by an existing installation of the printer port
software. Before attempting another installation:

■

Remove the existing installation

■

Restart your computerTo remove an existing printer port
installation:

1. Open Start - Settings - Control Panel - Add/Remove

Programs

2. Look for an entry with a name like "Shared Port", "Shared

Printer Port", " Print Server Driver" or " Print Server Port".

3. Select this item, click "Add/Remove", and confirm the

deletion.

Problem No. 2

On Windows 95, I installed the Print Port Driver for Peer-to-
Peer Printing, but when I selected a port on a Print Server and
clicked "Add", the printer was not installed.

Solution No. 2

Try installing the Printer using the standard Windows tools, as
follows:

1. Start the Add Printer Wizard.

2. Select Network Printer when prompted "How is the printer

attached to your Computer?", and click Next.

3. When prompted for the Network Path or Queue, enter a

dummy value such as shown below. (Do NOT select Yes for
"Do you print for MS-DOS programs?")

4. The printer wizard will display a message stating that "The

Network Printer is off-line". This is OK. Continue the Add
Printer Wizard until finished.

5. Go to the Printers folder (Control Panel-Printers). The

printer icon will be grayed out indicating the printer is not
ready.

6. Right-click the Printer, and select Properties. Then select the

Details tab, as shown below.

7. Click the Add Port button. On the resulting screen, select

Other, then Printer Server, as the port to add, as shown
below.

Содержание NP5000













































































Результаты поиска

Содержание NP5000

Отзывы:

Похожие инструкции для NP5000

Бренды по названию

Популярные бренды

NetComm NP5000, Руководство пользователя

Результаты поиска

Содержание NP5000

Отзывы:

Похожие инструкции для NP5000

Бренды по названию

Популярные бренды