NP3680 User Guide
YML838 Rev
Chapter1
Introduction
Thank you for purchasing this NP3680 USB MFP Server (in the following referred to as “Server”). This Server
is designed to connect your AIO/MFPs (All-In-One/Multifunction Peripheral), printers, USB mass storages
(hard drives, flash drives, and memory card readers), and scanners, to your network, allowing all network
users access to these shared USB devices resources.
1.1 About this Manual
This manual provides introductory information as well as detailed instructions on how to set up and manage
NP3680 in various network environments.
To fully benefit from this document, you should be familiar with basic networking principles. The instructions
described in this manual are based on the settings in a new Server. To reload the Factory Parameters, you
can reset this Server back to Factory Default, which will restore most of the settings. For details, please refer
to the chapter “Restore Factory Defaults”.
1.2 Customer Support
Should you require any technical assistance, please contact your product reseller. Or you can visit our
website at
http://www.netcomm.com.au
for latest product information. This document is subject to
changes without prior notice.
