NetComm NB8WVPN, Руководство пользователя

Страница: 70 / 92

NB8WVPN User Guide YML8WVPN
0 www.netcomm.com.au
To add a port mapping group, simply click the Add button.
To create a group from the list, first enter the group name and then select from the available interfaces on the list.
Automatically Add Clients With the Following DHCP Vendor IDs:
Add support to automatically map LAN interfaces including Wireless and USB to PVC’s using DHCP vendor ID
(option 60). The local DHCP server will decline and send the requests to a remote DHCP server by mapping the
appropriate LAN interface. This will be turned on when Port Mapping is enabled.
There are 4 PVCs (0/33, 0/36, 0/37, 0/38). 0/33 is for PPPoE and the others are for IP setup-box (video).
The Lan interfaces are ETH1, ETH2, ETH3, ETH4, Wireless and USB.
Port mapping configuration are:
1. Default :
ENET1, ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.
2. Video: nas_0_36, nas_0_37 and nas_0_38. The DHCP vendor ID is “Video”.
The CPE’s dhcp server is running on “Default”. And ISP’s dhcp server is running on PVC 0/36. It is for setup-box
use only.
In the LAN side, PC can get IP address from CPE’s dhcp server and access internet via PPPoE (0/33).
If the setup-box was connected with interface “ENET1” and send a dhcp request with vendor id “Video”, CPE’s
dhcp server will forward this request to ISP’s dhcp server.
And CPE will change the portmapping configuration automatically. The portmapping configuration will become:
1. Default :
ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.
2. Video: nas_0_36, nas_0_37, nas_0_38 and ENET1.