NB8WVPN User Guide
YML8WVPN
www.netcomm.com.au
Advanced > NAT > Port Forwarding
Note: This option is not available if your NB8WVPN is in Bridge mode.
To display the NAT function, you need to have enabled the NAT feature in the WAN Setup. By default, NAT is
enabled on your
NB8WVPN
Clicking on Advanced > NAT displays the following:
The Port Forwarding feature allows you to direct incoming traffic from WAN side (identified by Protocol and
External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the
external port needs to be converted to a different port number used by the server on the LAN side. A maximum of
32 entries can be configured.
For example, you may want to setup an FTP server with IP address 192.168.1.110 on your LAN for people to
connect to. The default port that an FTP server listens on is port 21. So, to this set this up you would do the
following:
Содержание NB8WVPN
Страница 1: ...NB8WVPN User Guide...
Страница 90: ...NB8WVPN User Guide YML8WVPN 90 www netcomm com au...
Страница 91: ...YML 8WVPN NB8WVPN User Guide www netcomm com au 91 ADSL2 VPN Router...