NetApp BES-53248, Руководство по установке

Страница: 29 / 38

14 Secure the switch to the rack using the screws.
Mounting the Switch into Ozeki Rack with BES-53248A1-ZRMK
Rail Kit
1 Remove the inner rails.
Pull the inner rail out until it is fully extended, and then push the disconnect latch
forward to release the inner rail from the middle rail. Remove the inner rail.
2 Align the holes on the mounting ear with the inner rail.
3 Secure the mounting ear with screws.
NOTE:
•
Repeat the similar steps to remove another inner rail and install the mounting ear.
4 Install the outer rails to the rack.
√
To install the front bracket: Pull the latch and install the rail by aligning the hooks
with the front rack holes. Then release the latch to lock the hooks into place.
√
To install the rear bracket: Align and push the rail firmly into the rear rack until it
clicks into place. Make sure the L-shaped bracket is facing inward.
27 Network Switch Installation Guide