NetApp BES-53248, Руководство по установке

Страница: 24 / 38

Hardware Installation
Unpacking the Hardware
Upon receiving the switch, inspect the packing box. If the packing box was not
damaged in transit, unpack it carefully.
NOTE:
• Retain the packing box in case you need to transport the switch.
•
The packing box is heavy. It is recommended for two persons to carry the box and
perform the installation.
Package Contents
The following items are included with a standard package. When you open the box,
check if all items are included and free of damage.
•
One BES-53248 Ethernet switch
•
Two AC power cords
• Console cable
•
Rack mount ears
• Statement paper
It is important to ensure all items are included in the package before starting
the installation.
1 Place the box on a flat and stable surface and cut the straps securing the box.
2 Carefully remove the switch. Then place it on a flat and clean surface.
3 Remove all other items from the box and inspect each item.
Installing the Switch
Site Survey
Consider the following when choosing a location to install the switch:
Installation Location
•
Ensure that there is adequate space to allow you to access the front and rear panel
ports for easy cable management and maintenance.
•
Ensure that the site is located within a proper distance to the power source. The
power source must be properly grounded and readily accessible.
• Ensure that the site is free from strong electromagnetic field sources, such as
radiators, motors, and heat sources.
•
Ensure that the site is not exposed to direct sunlight, rain or moisture.
Ventilation
•
The installation surroundings must have adequate ventilation. Proper clearance
between the switch and the wall or other equipment must be observed.
Rack Mounting
If installing on a rack, verify the following:
• Ensure the cabinet is stable and secure to withstand any unexpected movement,
such as an earthquake.
Network Switch Installation Guide 22