Netafim Fertikit 3G, Руководство по установке

Страница: 39 / 48

FERTIKIT 3G INSTALLATION MANUAL 39
SYSTEM OPERATION
• After tuning the flow rate for each dosing channel, adjust the cursors on each Rotameter.
NOTE
The Rotameter's scale is calibrated by the manufacturer for measurement of the
flow rate of water (H
2
O). Certain inacuracies may be observed when the flow rate
of liquids with different densities, such as fertilizers and acids, is measured.
• Measure the control cycle and enter the data into the controller -
only if EC/pH measuring equipment is installed (see the enclosed Controller Manual).
• Stop the program.
ATTENTION
Restore the settings of all the alarms back to the state where adequate protection
to the system and the crop is provided (see the enclosed Controller Manual).
If there is any problem during the process, see Troubleshooting in the
FertiKit™ User Manual
(The User Manual is provided with the FertiKit™ and can be downloaded at
https://www.netafim.com/en/digital-farming/netbeat/Fertigation/fertikit/ ).