Page 17
/
Single account management
For single account management:
1. In the box for Port #1 in the
Account
column, enter a Net2Phone account
number.
2. In the
PIN
field, enter the Personal Identification Number for that account.
3. Check the
Use account for all ports
checkbox.
4. If you wish to be able to receive incoming MAX-to-MAX calls (calls from
another Net2Phone device) on a port, select its
Y
radio button in the
Login
column.
5. After the desired changes have been entered, click the
Save
button to save
them.
NOTES:
•
When multiple ports are sharing a single account, only one of the ports
sharing the account may have the
Y
selected.
•
Only one call at a time can be made using any given account number.
•
Whenever a selection in the Login column is modified, the MAX must be
restarted before the change will take effect.
Multiple account management
For multiple account management:
1. For each port that has a telephone attached, enter the account number and
PIN you intend to use with that telephone.
2. Make sure that
Use account for all ports
is
not
checked.
3. If you wish to be able to receive incoming calls on a port, select the
Y
radio
button in its
Login
column.
4. After the desired changes have been entered, click the
Save
button to save
them.
Reminder:
whenever a button in the
Login
column is selected or cleared,
the MAX must be rebooted before the change will take effect.
Restarting the System
To restart (or “reboot”) your Net2Phone MAX 410 system, click the Restart
System link to access the
Restart System
page, then select
Click to restart
system
.
NOTES:
•
The default values in the
Network Configuration
table do not require
change unless a firewall is in use.
•
The default values in the
Voice Configuration
table should normally
be left unchanged.
Net2Phone MAX 410 – Quick Start Guide
Managing Single and Multiple Accounts
