net-TV PTA-8960A5, Руководство по эксплуатации

Страница: 19 / 118

<<
19
>>
Connecting the IR Blaster
Attach the supplied IR Blaster to the device connected to the IR Blaster port of the net-TV Box, and place
the other head on the top of the video source such as Set Top Box to point at its Infrared receiver.
✍
x
Keep the distance between the IR cable’s head and the remote sensor of video source within 5cm.
x
After a successful IR Learning, you could remove the backing paper from the IR Blaster and fix in place.
IR learning
With the net-TV 2012 installed on your PC, you could do the IR learning by switching to the video source
of the external connected video device. While learning, you must aim your physical remote control of the
video source at the front led cap of the net-TV Box and keep the distance between them within 5cm.
You can refer to
IR Learning for more instructions.
Connect the wireless WiFi adapter
Plug the USB WiFi wireless network card into the WiFi port, and set WiFi as the network configuration of
the Box, and then you can get to internet via the WiFi wireless network.
✍
The two USB ports on the Box have their respective use, so the USB devices must be plugged into the
correct port to avoid the unavailable situation.