Installation Guide
31
STEP 1
Screw the Fixing Plate to your
dome body.
STEP 2
Remove the Hard Ceiling
Mount from the Decoration
Cover.
STEP 3
Attach the Mount to the ceiling.
Mark the locations where all
three ceiling holes should go.
STEP 4
Drill these holes on the hard
ceiling.
STEP 5
Fix the Mount with three
screws.
STEP 6
Connect the data cable
through the center hole of the
Mount to the dome body.
NOTE:
If use an IP
dome, a network cable
is needed other than the data
cable. In addition, the length of
the network cable should be no
longer than 2 cm.
