Installation
Guide
16
Switch No.
Protocol
Baud Rate
00
VCL 9600
01
Pelco D
2400
02
Pelco P
4800
04
Chiper 9600
05
Philips 9600
07
DSCP 9600
08
AD422 4800
09
DM P
9600
11
Pelco D
4800
12
Pelco D
9600
13
Pelco P
2400
14
Pelco P
9600
15
JVC 9600
Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,
the protocol switch should be set as below.
Decimal Digit Single Digit
NOTE:
The number “0” should locate upwards as shown in the
diagram above for correct switch definition.
3.4
Dome Cable Definition and Requirements
For operation, the integrated dome camera requires the video cable to carry
the video signals to the remote viewing site, power cable to power the dome
and RS485 data cable to carry commands from the control device.
3.4.1 Cable
Requirements
For operation, the integrated high speed dome cameras require video and
data cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial cable to send video signals is recommended.