Ness SCR PLUS, Инструкции по установке, Страница: 9 / 12

9
To program the ReLAy OUTPUT to operate by a LOW BATTeRy signal from transmitters.
Relay oUtPUt oPeRatIon
1
O
n
2
3
4
5
Program Mode
ON/ALARM Pulses relay
PANIC/TAMPR Pulses relay
AUX Pulses relay
LOW BATT Pulses relay Operating Mode
ON/OFF/ALRM Latches relay
PANIC/TAMPR Toggles relay
AUX Toggles relay
LOW BATT Latches relay
1
O
n
2
3
4
5
Program Mode
ON/ALARM Pulses relay
PANIC/TAMPR Pulses relay
AUX Pulses relay
LOW BATT Pulses relay Operating Mode
ON/OFF/ALRM Latches relay
PANIC/TAMPR Toggles relay
AUX Toggles relay
LOW BATT Latches relay
SIgNAL TyPe
LOW BATT
ReLAy MODe
LATChINg
ReLAy ACTION
LOW BATT signal:
Latch On
SWITCh SeTTINgS Switch 5 off, Switches
2, 3, 4 on
SIgNAL TyPe
LOW BATT
ReLAy MODe
PULSe
ReLAy ACTION
LOW BATT signal:
Pulse
SWITCh SeTTINgS Switch 5 on, Switches
2, 3, 4 off
OPeRATION OPeRATION
LOW BATT from any programmed device
> Relay Latches On
The relay will latch off when all devices
send a battery restoral signal
LOW BATT from any programmed device
> Relay Pulses 2sec
OPeRATION TABLe 7 OPeRATION TABLe 8
aCtIon swItChes 2-5 InhIBIt InPUt Relay
Radio Key or Reed Switch On/Off/Alarm All Off Input Ignored Latch
Device Alarm, PIR or Reed Off/Restore Switch 2 On Input Ignored No Change
Device Alarm, PIR or Reed On Switch 2 On Input Ignored Pulse
Key ON Switch 2 On Low No Change
Key ON Switch 2 On high Pulse
Key OFF Switch 2 On Low Pulse
Key OFF Switch 2 On high No Change
taBle - Relay oPeRatIon wIth InhIBIt InPUt