4
3.2 Adding Card Users Manually
(Recommended method)
Press 1
- The LED will glow Orange. Enter the
ID Number
(Memory slot number 1 -> 2500 of the card you wish to
add) followed by
#
. Present the new card to the Reader. When successful the LED will flash Green. If more cards
are to be added repeat the process. Press
#
to end
Press
1
Enter ID
No.1
#
Present
Card 1
#
Enter ID
No.2
Present
Card 2
#
…
S2 will auto assign PIN “1234” (Factory Default) to programmed cards. If the system is set for ‘Card AND PIN’
for access you must go to “User Settings” and assign an individual PIN to each card
This is the recommended method of adding Card Users as the ID Number of all cards programmed will be known
making it easy to select any individual card you may wish to delete
3.3 Adding “PIN Only” Users (No card)
Press 1
- The LED will glow Orange. Enter the
ID Number
(Memory slot number 1 -> 2500 of the User) followed by
#.
Enter a
PIN
for that User. When successfully added the LED will flash Green.
Press #
to end
.
If more Users are
to be added repeat the process for each User
Press 1 Enter ID No.1 # Enter PIN 1 # Enter ID No. 2 Enter PIN 2 # ...
All PIN numbers must be 4 Digits of any number combination, however they must not be 1234
3.4 Adding Card Users Sequentially
Multiple Users can be added sequentially as either a Card or Pin
Press
1
Present Card 1
to the Reader
Enter ID
No.1
Present Card 2
to the Reader
Enter ID
No. 2
…
Enter
PIN 3
#
Enter ID
No. 3
# …
3.5 Adding Users with the “Add User Master Card”
User Cards can be added anytime without entering Program Mode by using the “Add User Master Card” that
comes with the unit (or card that you have programmed)
Present “Add User Master Card”
to the Reader - The LED will glow Orange.
Present the Card to be added
. When
successfully added the LED will flash Green.
Present any additional cards to be added in sequence
. When
complete
Present “Add User Master Card”
again. The LED will flash Red
Present ‘Add User Master
Card’ to the reader
Present each Card to be added
to the reader in sequence
Present ‘Add User Master
Card’ to the reader to exit
If the card being added is already in the system S2 will respond with 3 beeps
