Ness MEDI-ALARM, Руководство по программированию

Страница: 9 / 21

Doc ID. 100-106 PROGRAM MANUAL.DOC 8
6.3 PROGRAMMING OPTIONS
Option Description
1
TRANSMITTER 1 PROGRAM
1) 1 is on the display
2) Press the ‘HELP’ button to view programmed option.
- unprogrammed
no device has been programmed for transmitter 1
P programmed pendant a device is programmed for transmitter 1
E erase remove previously programmed device
To program a new pendant.
•
Display must show ‘-’ (unprogrammed)
•
Press any button on a new unprogrammed pendant 3 times
Medi Alarm will Beep with each press and twice on the third press to acknowledge when the
key is programmed. The display will show ‘P’ to indicate that the pendant is
programmed.
To program a new detector.
•
Display must display ‘-’ (unprogrammed)
•
Trigger detector (3 transmissions must be detected)
Medi Alarm will Beep with each transmission of the detector and twice on the third
transmission to acknowledge when the detector is programmed. The display will show
‘P’ to indicate that the detector is programmed.
Erasing Pendants or Detectors
Go to the Transmitter option you wish to erase (1 to 8)
To erase a user pendant or detector, press ‘HELP’ to select E (ERASE). (not available if
unprogrammed)
•
Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
erase. Display will show ‘-’indicating erased.
•
Press the ‘Cancel’ button to move to the next program option.
2
TRANSMITTER 2 PROGRAM
3 TRANSMITTER 3 PROGRAM
4 TRANSMITTER 4 PROGRAM All pendants and detectors are programmed in
5 TRANSMITTER 5 PROGRAM the same manner as Transmitter 1.
6 TRANSMITTER 6 PROGRAM
7 TRANSMITTER 7 PROGRAM
8 TRANSMITTER 8 PROGRAM
Press the ‘Cancel’ button to move to the next program option.
C
SYSTEM CHECK: Check radio signal strength of pendants and detectors.
Displays the first pendant or detector’s signal strength, 1 being minimum and 9 being maximum.
Only one pendant or detector can be tested at a time. The signal level is displayed and also beeped to
indicate the level.