Doc ID. 100-106 PROGRAM MANUAL.DOC
12
o
ENABLE OVER DUE TIMER:
The Over Due Timer is the time period between ‘CANCEL’ button presses to restart the over due
timer. The over due timer is for local indication purposes only. (no alarm report is sent) 0-255
hours. default = 0, disabled. 1,2 or 3 digits may be programmed with a maximum of 255 hours. If
a number greater than 255 is programmed, Medi Alarm will sound a long beep and re display the
original value.
1) ‘o’ is steady on the display.
2) Press the ‘HELP’ button and the programmed time will be flashed out in hours. The display will
flash ‘o’.
3) Press the ‘HELP’ button until the first digit is on the display. (0 to 9)
4) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
5) Press the ‘HELP’ button until the second digit is on the display. (0 to 9)
6) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
7) Press the ‘HELP’ button until the third digit is on the display. (0 to 9)
8) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
9) Press the ‘CANCEL’ to view the programmed time. (‘o’ will then flash on the display)
To view the programmed time again press the ‘HELP’ button then the ‘CANCEL’ button and the
stored value will flash on the display after which ‘o’ will flash.
10) Press the ‘CANCEL’ button to display ‘o’ steady.
Press the ‘Cancel’ button to move to the next program option.
i INACTIVITY
TIME.
The inactivity timer alarm is triggered if the ‘CANCEL’ button or detector is not triggered in this
time. 1-255 hours, default 0. 1,2 or 3 digits may be programmed with a maximum of 255 hours.
If a number greater than 255 is programmed, Medi Alarm will sound a long beep and re display
the original value.
1) ‘I’ is on the display.
2) Press the ‘HELP’ button and the programmed time will be flashed out in hours. The display will
flash ‘i’.
3) Press the ‘HELP’ button until the first digit is on the display. (0 to 9)
4) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
5) Press the ‘HELP’ button until the second digit is on the display. (0 to 9)
6) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
7) Press the ‘HELP’ button until the third digit is on the display. (0 to 9)
8) Press the ‘SIDE LEVER’ button or press the ‘HELP’ and ‘CANCEL’ buttons simultaneously to
store each digit. (_ will flash)
9) Press the ‘CANCEL’ to view the programmed time. (‘i’ will then flash on the display)
To view the programmed time again press the ‘HELP’ button then the ‘CANCEL’ button and the
stored value will flash on the display after which ‘i’ will flash.
10) Press the ‘CANCEL’ button to display ‘i’ steady.
Press the ‘Cancel’ button to move to the next program option.
Содержание MEDI-ALARM
Страница 1: ...Medi Alarm Programming Manual ...
