5000 Series Dialler
Page 4
PROGRAMMING
Programming the Dialler is virtually identical to programming the
Control Panel - simply plug the Dialler in and use the Installation
options on the following pages. However, for security reasons, the Dialler
contains an optional Installer Access Code to protect the Central Station
information. If this code has not been programmed, then all of the
options are available to any installer for review and change.
If the Installer Access Code has been programmed, then only the
P30E and P98E options are available for use without the code. To use
any of the remaining options, you must first enter the code ie. in
Installer Program mode, press:
P Code E
If the code is valid, the Dialler will respond with 3 beeps and the
LINE/EXPAND indicator will turn on. This indicator will remain on
until the use of a programming option which does not belong to the Dialler.
Each time you enter the Installer Program mode, you must use the
Installer Access Code as above.
During programming, numeric values are displayed via the 8 ZONE
indicators, the 9 (BATTERY) and the 0 (MAINS) indicators. For your
convenience, single digit values remain displayed while multi-digit values
are flashed Out.
During the programming of the telephone numbers, it is occasionally
necessary to enter a special PAUSE digit. To do so, press and hold the
E button for at least 1 second. For example to programme a telephone
number commencing with 0 'PAUSE' 4, press 0, long E, 4 etc.
During the telephone number display, the PAUSE digit is represented by
the TAMPER/SATELLITE indicator.
NOTE: each PAUSE = 2.5 seconds
The programming data for the Dialler is stored in a special memory
on Exit from the Installation Programming mode. Thus if data is changed
and the power is turned off before Exit from this mode, then the new
data will be lost.
A number of the Installation Programming options are duplicated for
the second Dialler and are accessed by adding 100 to the corresponding Dialler #1 option, eg.
P34E = Dialler #1 client account number.
Pl34E = Dialler #2 client account number.
The options belonging to Dialler #2 are identified in the option's
title which is also underlined.
