O T H E R W A R N I N G S
When you Disarm your SecurityGuard it may have some
warnings to give you. SecurityGuard will alert you by sounding
a series of Beeps or double beeps instead
of the normal 3 Beeps and a message will be displayed
accordingly.
The warnings may be for Low Battery or Alarms, these are fully
explained later in this manual.
The Display will remain flashing for 5 minutes after you Disarm,
you may choose to stop the display by pressing OFF once. You
can also recall warning displays at any time by simply pressing
OFF again, this will bring the flashing display back for another
5 minutes.
When SecurityGuard has more than one warning to give,
pressing the button repeatedly will cycle you through the
displays.
A R M I N G
To Arm your SecurityGuard press the button on any
Radio Key.
Your SecurityGuard will Beep once and will be displayed.
Your SecurityGuard will be programmed with a short Exit Time,
this allows you to depart your premises without triggering an
alarm. Your SecurityGuard will Beep once more to warn that
Exit Time has finished and it is now ready to detect intruders.
D I S A R M I N G
To Disarm your SecurityGuard press the button on
any Radio Key.
Your SecurityGuard will Beep three times and will
be displayed.
When Disarmed the O.K. light will flash once every 5 seconds
to indicate that SecurityGuard is happy and all is O.K. If the
Battery Charger is plugged in the O.K. light will be on constantly
and blink off once every 5 seconds.
11
O P E R A T I N G Y O U R A L A R M
O P T I O N A L
Your outside siren may beep when you Arm and
Disarm if programmed.
If a Strobe light is fitted to your outside siren,
it will flash briefly when you Arm and Disarm
Clear
ON
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
Содержание Security Guard
Страница 1: ...SECURITYGUARD O W N E R S M A N U A L ...