background image

RADIO KEY 
LOW BATTERY

SecurityGuard will warn you when a Radio Key which has
operated recently has a Low Battery. The Low Battery warning
is normally given when SecurityGuard is Disarmed.

SecurityGuard will flash the Radio Key number for 5 minutes
along with a              on it’s display and will sound a series of
double beeps                  for 3 seconds to warn of the problem. 

Example 

If Radio Key number 3 

(User 3.)

has a Low Battery then

SecurityGuard will flash              for  5 minutes and double beep  

for 3 seconds at Disarm.

(As with all SecurityGuard displays you may choose to stop the
display before the 5 minutes by pressing OFF on any Radio Key).

The O.K. light on the Radio Key will flash or not illuminate when
there is a Low battery, however the Radio Key should still
function for some time.

Some models of Radio Key have a different location for
the OK Light.

15

R A D I O   K E Y   L O W   B A T T E R Y

TO REPLACE BATTERY    

1.  

Using a coin, turn the Battery cover

anticlockwise and remove.

2.  

Lever the battery  out with a small screwdriver

or knife.

3.  

Replace  the Battery with a 3 Volt Lithium type;

Panasonic CR2016
Sony         

CR2016

Ensure the battery is the correct way in with the
+  side facing up.

4.

Re-assemble the Battery cover  making sure

that the dot on the Battery cover matches the dot
on the key and turn  cover  clockwise to tighten.

INTERNATIONAL  KEY

1.  

Glide battery hatch off. You may need to use a

small screwdriver or knife to help lever, the hatch off.

2.  

Replace the battery with a 

12 Volt alkaline type  battery;

Duracell    MN21
Energiser  

A23

Vinnic       

L1028

or  equivalents.

Ensure the Battery is in the correct way, you can
test this by pressing the  OFF button  and checking
that the light illuminates

before re-assembling the

Radio Key. 

3.  

Re-assemble the battery hatch.

N O T E

Each one of your Radio Keys has been allocated a number

from 1 to 8.  This number is used to identify things like

which Key has a Low Battery or caused a Panic Alarm.

The Radio Key Number and user name are listed in a

table on the back of this manual.                  

OFF

OFF

ON

OFF

ON

OFF

ON

ON

OFF

After replacing the Radio Key 

battery, test that the Radio key is

functioning correctly by Arming

and Disarming your SecurityGuard

and checking that the O.K. light 

illuminates on the Radio key.

Содержание Security Guard

























Отзывы: