6
Emergency STOP button -
pressing it will switch the whole machine off. If there is no longer a
reason for keeping the machine switched off, you can switch it on again. The Emergency STOP
button is deactivated by turning (or pressing – depending on the system deployed) the button.
5. MAIN SWITCH – POSITIONS
OFF
- the laminator is switched off.
ON
- the laminator is switched on.
PRESSURE
SETTING KNOB
– setting the knob to the required position sets the main roller pressure.
In the down position the pneumatic system pushes the main roller down by applying the force from
1000 up to 4500N. In the up position, the pneumatic system automatically reduces the main roller
pressure to 500N.
6. CONTROL PANELS- RIGHT
Emergency STOP button –
it has the identical function as the one on the left control panel.
The top roller can move up and down. The gap ranges from 0 to 40 mm
.
Please note:
the roller lift functions only if the rotation direction run or rev has not been selected
(the direction button is not lit). The roller lift is controlled by the following buttons:
down
– the top roller moves down. The button must be held depressed. When released, the
roller stops moving immediately. When the top roller touches the material or the bottom roller, it
stops automatically, alerts with sound and lights and the machine will not allow further down
Emergency STOP button
Display
Roller Lift
Roller Rotation
Pressure Setting
