4
2. APPLICATIONS
1.
1.
1.
1.
The Neschen large-format laminator is intended for applying laminating and backing foils using
either pressure or heat to activate an adhesive layer to large-format prints, plates, boards and
similar products whose width does not exceed 1650 mm.
2.
2.
2.
2.
Although the laminator is designated as a large-format device, it can be also used for
laminating
smaller formats, starting from A5.
3.
3.
3.
3.
Maximum length of laminated prints is not limited by the laminator’s construction.
4.
4.
4.
4.
Larger formats (greater than A0 or equal to the device’s maximum working width) may require
the help of another person.
5.
5.
5.
5.
The Neschen laminator’s simplicity and flexibility is based on its ability to work with cut material
(sheets), cut from material in rolls. The user has a unique opportunity to choose a laminating
technique. Either sheet lamination or from-roll lamination or roll-to-roll lamination.
6.
6.
6.
6.
Any changes made to this laminator without the manufacturer’s permission will relieve the
vendor from its liability for any damage or injury!
7.
7.
7.
7.
If the laminator’s features allow the device to be used for other purposes not listed here, the
user must consult such application with the vendor.
8.
8.
8.
8.
When working with the device, abide by the provided safety guidelines to avoid injuring yourself
or other persons around you.
9.
9.
9.
9.
Those instructions which require special attention are in the User Instructions identified with the
following safety symbol:
