NERI 423131, Информационная записка, Страница: 6 / 32

MARKING IDENTIFICATION
Inside the garment there is a label of which is shown below a
reproduction.
1. Manufacturer’s mark
2. Model
3. Garment size
4. Body measurements
5. CE Marking
6. Materials/Composition
7. Maintenance
8. Production place
Waterproofing class
Transpiration class (Ret ≤ 20)
EN 343:2003+A1:2007
EN 342:2004
EN ISO 20471:2013 +A1:2016
Garment class
3 classes of impermeability to water and of breathability are fore-
seen, the protection levels of which increase from 1 to 3.
3 classes of garment are foreseen, the protection levels of which increase from
1 to 3.
0,459 (B)
l
cler
: Resulting effective thermal insulation between
the skin and the most outer part of the garment in
defined conditions and with test vest B.
The value is expressed in m
2
•
K/W.
X
I
cle
: Effective thermal insulation
(with vest B)
2
Air permeability class
Class AP mm/s
1 100 > AP
2 5 < AP ≤ 100
3 AP ≤ 5
X
Water penetration resistance class.
The “X” means that the garment has not been tested.
* Values obtained with vest type B:
Long-sleeved vest
Long underpants
Socks (knee length)
Felt feet warmers
Knitted gloves
Balaclava
MADE IN CHINA
MAX
25x
ESTERNO - EXTERNAL
FODERA - LINING
Registered Community Trademark
N° 016928426 at EUIPO Alicante - Spain
CISA
cod. 423131
S
156-164
86-94
A
EN ISO 20471:2013
+A1:2016
EN 343:2003
+ A1:2007
EN 342:
2004
0,459(B)
X
2
X
g
Via 8 Marzo 6, 42025 Cavriago (RE) - Italy
3
1
5
4
2
6
8
7
1
5