![Nera saturn bp Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/nera/saturn-bp/saturn-bp_technical-manual_1668375032.webp)
30
Saturn Bp Portable – Technical Manual
MOUNTING
MOUNTING
MOUNTING
DISMOUNTING
DISMOUNTING
DISMOUNTING
S e r v i c e
S e r v i c e
S e r v i c e
Replacing Trunk Parts
8
8
8
• Turn the unit again
• Mount 6 standoffs (spacers)
Note! 3 sizes – 12 mm/16 mm/22 mm
7 mm spanner! See figure!
6
6
6
• Place MCU heatsink with cooling fins down as shown
• With the Main Control Board up, lower the electronic unit
carefully down onto the bolts.
Note! Make sure that the bolts do not damage the electronics.
Note! Make sure that the Sil pad is positioned between the
bolt and the spool on the Power Board.
7
• Unscrew 6 standoffs (spacers)
Note!
3 sizes – 12 mm/16 mm/22 mm
7 mm spanner. See figure!
8
• Turn around the MCU
• Remove 4 unbraco screws
Note! M4x12 – 3 mm unbraco key
7
7
7
• Holding the unit together, turn it carefully around
• Mount 4 unbraco screws
Note! M4x12 – 3 mm unbraco key
16 mm
16 mm
22 mm
16 mm
12 mm
16 mm
gaskets
bushing insulator
9
• Holding the unit together, turn it upside once more
• Lift up/out electronic unit including main circuit board (top
side) and power supply (bottom side)
Note! Save the small SIL pad protecting the spool on the
power supply from being damaged by the fastening
screw.
M4x12
M4x12
M4x12 M4x12
Sil pad
MCU heatsink
Содержание saturn bp
Страница 1: ...Saturn Bp Portable Technical Manual Saturn Bp Portable Technical Manual...
Страница 2: ......
Страница 4: ...2 Saturn Bp Portable Technical Manual...
Страница 43: ......