Apex Wireless Expansion Module (WXM) - Setup Guide
Page 13
Eco-Back – The EcoSMART Back Type allows for one pump to run the EcoSMART
Back pump mode. See the EcoSMART Pump’s owner’s manual for more details. The
maximum intensity as well as the master pump to be synchronized to is specified in
this profile type. Eco-Back a non-EcoSMART pump to an EcoSMART pump is not
possible.
ADVANCED PROGRAM EXAMPLE
The following program assumes that there are two pumps in the Aquarium – one on the
right side, and one on the left side. This example shows how each pump can be controlled
independently, and its mode of operation changed multiple times throughout the day.
The following table shows how the profiles required for this program example.
Profile Name
Mode
Notes
ReefCrst
Reef Crest
Max Intensity 100%
TidalSwl
Tidal Swell
Max Intensity 80%
Nutrient
Nutrient Export
Max Intensity 90%
Pulse
Pulse
Max Intensity 100%, on time to 0.55 seconds
Night
Constant
Max Intensity 50%
Sync
Synchronize
Max Intensity 100%, sync to VorTechLeft
Anti-Sync
Anti-sync
Max Intensity 100%, anti-sync to VorTechLeft
Slow
Constant
Max Intensity 25%
Table 3 - Profiles Defined for Program Example
The following programs are used for each of the VorTech outlets.
<VorTechLeft>
Set Pulse
If Time 8:00 to 10:00 Then ReefCrst
If Time 12:00 to 14:00 Then TidalSwl
If Time 16:00 to 20:00 Then Nutrient
If Time 22:00 to 06:00 Then Night
If FeedA 000 Then Slow
If FeedD 000 Then Off
<VorTechRight>
Set antiSync
If Time 8:00 to 9:00 Then Sync
If Time 12:00 to 13:00 Then Sync
If Time 16:00 to 21:00 Then Sync
If Time 22:00 to 06:00 Then Night
