Neptune E-CODER) R450i, Руководство по установке и обслуживанию

Страница: 4 / 40

Copyright
This manual is an unpublished work and contains the trade secrets and
confidential information of Neptune Technology Group Inc., which are not to be
divulged to third parties and may not be reproduced or transmitted in whole or
part, in any form or by any means, electronic or mechanical for any purpose,
without the express written permission of Neptune Technology Group Inc. All
rights to design or inventions disclosed herein, including the right to
manufacture, are reserved to Neptune Technology Group Inc.
Neptune engages in ongoing research and development to improve and
enhance its products. Therefore, Neptune reserves the right to change product
or system specifications
without notice.
Trademarks Used in this Manual
ProRead and E-CODER are trademarks of Neptune Technology Group Inc. R900
is a registered trademark of Neptune Technology Group Inc. E-CODER)R900
i is a
trademark of Neptune Technology Group Inc. Other brands or product names
are the trademarks or registered trademarks of their respective holders.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
l
This device may not cause harmful interference.
l
This device must accept any interference received, including interference that
may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
l
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.