Actuator
Specification & Installation Instructions
BM-N-210803
1
Technical Data
BM000N BM000FN BM000FFN BM060N BM060FN BM060FFN BM020N BM020FN BM020FFN
Running time through 90º
15 sec
6 sec
3 sec
15 sec
6 sec
3 sec
15 sec
6 sec
3 sec
Power consumption
10 VA
10 VA
10 VA
18VA Peak,
10VA
18VA Peak,
10VA
18VA Peak,
10VA
10 VA
10 VA
10 VA
Torque
50 in.lb. [5,6 Nm] at rated
voltage
35 in.lb.
[3,9 Nm] at
rated voltage
50 in.lb. [5,6 Nm] at rated
voltage
35 in.lb.
[3,9 Nm] at
rated voltage
50 in.lb. [5,6 Nm] at rated
voltage
35 in.lb.
[3,9 Nm] at
rated voltage
Fail safe - Enerdrive
No
Yes
No
Auxiliary switches
No
Yes (2)
Ingress protection
IP22 equivalent to Nema type 2, IP54 equivalent to Nema type 3R if water tight
inlet bushings (not supplied NEP617) are installed
IP22 equivalent to Nema type 2
Feedback
4 to 20 mA or 2 to 10 VDC adjustable (default setting: 4 to 20mA)
Power supply
22 to 26 VAC or 28 to 32 VDC
Electrical connection
18 AWG [0.8 mm
2
] minimum
Inlet bushing
2 inlet bushing of 13/16 in [20.6 mm]
Control signal
Analog, Digital or Pulse with modulation (PWM) programmable (default setting: Analog control signal)
Angle of rotation
0 to 90 degrees, mechanically adjustable (default setting: 90º stroke)
Direction of rotation
Reversible, Clockwise (CW) or Counterclockwise (CCW) (default setting: CW direction)
Ambient temperature
-22ºF to +122ºF [-30º C to +50º C]
Storage temperature
-22ºF to +122ºF [-30º C to +50º C]
Relative Humidity
5 to 95 % non condensing.
Weight
3 lbs. [1.4 kg]
Warning: Do not press the clutch when actuator is powered
Dimensions
Dimension
Inches Metric (mm)
A
1.50
38.1
B
3.64
92.5
C
6.60
167.5
D
model 000 & 060
3.02
76.8
model 020
3.81
96.8
Caution
We strongly recommend that all Neptronic
®
products be wired to a separate transformer and that transformer shall service only Neptronic
®
products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System
U.S.A. Patent #5,278,454
Feature:
•
Mounts easy on round & square shaft (with option
–8).
•
External clutch for manual adjustments.
•
Maintenance free.
•
Position indicator.
•
Control signal fully programmable.
•
Auto stroke on power up
•
Brushless DC driven motor.
•
Fail safe by
Enerdrive System
1
(on model 060).
•
Auxiliary switches (on model 020)
BM000N
BM020N
BM060N
BM000FN
BM020FN
BM060FN
BM000FFN
BM020FFN
BM060FFN
