POC-551VTC
85
4.8
Power over Ethernet (PoE)
The Power over Ethernet (PoE) setting in the BIOS allows you to enable/ disable the
PoE function of the designated port upon system boot up.
To enable/ disable Power over Ethernet settings:
1.
Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Power]
[PoE Enable]
3.
Use the up/ down arrow to highlight and select between Enabled/ Disabled,
press Enter to make your selection.
4.
When Enabled, you may set each LAN port’s PoE function by selecting
Enabled/ Disabled using the arrow key, press Enter to make your selection.
Enable/ Disable LAN PoE function
Corresponding LAN ports
5.
Once set, press F10 to save setting and exit.
Содержание POC-551VTC Series
