Neousys Technology Nuvo-8208GC Series Скачать руководство пользователя страница 85

Страница: 85 / 141

Nuvo-8208GC Series

System Configuration

4.1

BIOS Settings

The system is shipped with factory-default BIOS settings meticulously programmed for

optimum performance and compatibility. In this section, we’ll illustrate some of BIOS settings

you may need to modify. Please always make sure you understand the effect of change

before you proceed with any modification. If you are unsure of the function you are changing,

it is recommended to change one setting at a time to see its effect(s).

NOTE

Not all BIOS settings will be discussed in this section. If a particular setting/ function you are

after requires specific BIOS settings but is not discussed in this section, please contact

Neousys Technical Support staff.

Содержание Nuvo-8208GC Series














































































































































Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы:

Neousys Technology Nuvo-8208GC Series, Руководство пользователя, Страница: 85 / 141

Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы: