Neousys Technology Nuvo-8208GC Series Скачать руководство пользователя страница 108

Страница: 108 / 141

Nuvo-8208GC

108

4.3

RAID Configuration

To set up a RAID 0 or 1 volume in Legacy or UEFI mode, you need to have at least two hard

drives or SSDs installed. The system supports RAID configurations in RAID 0 (striping) or

RAID 1 (mirror) mode. Users can select the configuration that best suit their needs with RAID

0 (striping) mode offering better hard drive read/ write performances while RAID 1 (mirror)

offers better data security.

WARNING

Please back up hard drive data before you create or modify RAID volume(s) as the process

may cause irreversible data deletion. When creating a RAID volume, it is also recommended

to use hard drives from the same batch (same brand, model, capacity, rpm rate, etc.) to avoid

performance or capacity allocation issues.

4.3.1

Legacy Mode RAID Configuration

To set up RAID configuration, you need to pre-configure the SATA mode setting in the BIOS.

Please refer to the following steps:

1. When system boots up, press

to enter BIOS setup utility.

2. Go to

[Advanced] > [SATA And RST Configuration] > [SATA Mode Selection]

highlight

[Intel RST Premium With Intel Optane System Acceleration]

and press

ENTER.

Содержание Nuvo-8208GC Series














































































































































Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы:

Neousys Technology Nuvo-8208GC Series, Руководство пользователя, Страница: 108 / 141

Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы: