Neousys Technology Nuvo-8108GC Series Скачать руководство пользователя страница 87

Страница: 87 / 142

Nuvo-8108GC

System Configuration

4.1

BIOS Settings

The system is shipped with factory-default BIOS settings meticulously programmed for

optimum performance and compatibility. In this section, we’ll illustrate some of BIOS settings

you may need to modify. Please always make sure you understand the effect of change

before you proceed with any modification. If you are unsure of the function you are changing,

it is recommended to change one setting at a time to see its effect(s).

NOTE

Not all BIOS settings will be discussed in this section. If a particular setting/ function you are

after requires specific BIOS settings but is not discussed in this section, please contact

Neousys Technical Support staff.

Содержание Nuvo-8108GC Series















































































































































Результаты поиска

Содержание Nuvo-8108GC Series

Отзывы:

Neousys Technology Nuvo-8108GC Series, Руководство пользователя, Страница: 87 / 142

Результаты поиска

Содержание Nuvo-8108GC Series

Отзывы: