Nuvo-2000+ Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 39 of 78
3.2 Install a HDD on SATA#2 Port
The SATA#2 port is located on the backplane via a 7-pin SATA connector plus a 4-pin
power connector. HDD bracket for SATA#2 port is part of the chassis and is on the bottom
side. A dedicated cable is shipped with Nuvo-2000+ for connecting the 2.5” HDD. To install
a HDD on SATA#2 port, please follow the steps listed below.
1. Put the chassis upside down. You can see the cover of HDD bracket exposed. Loose
the screw to open and remove it.
2. Get four M3 flat-head screws from the accessory box. Place your HDD into the HDD
bracket and fix it with M3 flat-head screws. Note that the HDD must be placed in a right
direction.
