Nuvo-2000+ Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 18 of 78
2.2.10 DC Input Terminal Block
Nuvo-2000+ offers two ways for DC power input.
You can supply DC power via either the DC jack or
the pluggable terminal block on the front panel.
The 2-pin pluggable terminal block is fit for field
usage where DC power is usually provided. It
accepts a wide range of DC power input from 8 to
25V. And the screw clamping connection of terminal
block gives a very reliable way of wiring the DC
power. The following table describes the pin
definition of the pluggable terminal block. For detail
information of connecting DC power, please refer to
section 3.7.
Pin
Description
V+
Positive polarity of DC power input.
V-
Negative polarity of DC power input (usually power ground).
Caution
1.
Please make sure the voltage of DC power is correct before you connect it to Nuvo-2000+.
Supplying a voltage over 25V will damage the system.
2.
You should use either 2-pin pluggable terminal block or DC jack for DC power input. DO NOT
supply power to both connectors at the same time.
