Neopost IM 30, Руководство оператора

Страница: 2 / 10

2
WARNINGS
• Before connecting check whether the machine is
suitable for the local mains voltage; refer to the type
plate. The mains plug shall be connected only to a
socket outlet provided with a protective earth contact.
• The socket outlet shall be installed near the
equipment and shall be easily accessible.
SAFETY PRECAUTIONS
• This machine is only to be operated by fully trained
personnel. The manufacturer accepts no
responsibility for injuries caused by unauthorized
operation.
• The opening of covers (except the top cover) must
be carried out only by a skilled and authorized
person who is aware of the hazard involved. The
machine will not operate with the top cover opened.
• Keep long hair, fingers, jewellery, etc. away from
turning parts of the machine.
USED SYMBOLS
In this manual the following symbols are used.
Warning, this symbol indicates a wrong
action which can cause a hazard to health
or damage the machine.
Warning, this symbol indicates a hazard
to life because of high voltage.
NOTE Additional information
2. GENERAL
Before using this machine thoroughly read the
operating instructions. In the European Union an
operator manual printed in the national language(s)
is supplied with the machine. If it is not, contact your
authorized distributor.
2.1 Process description
The envelopes are placed in the hopper as shown in
figure 2. As soon as the machine is started, the first
envelope is separated from the stack and placed flat
on the slitting table A. Then the envelope is slit open at
the cutting areas B, C and D (in logical order).
2.2 Operating controls (fig. 3)
A : support plate
B : power switch
C : lever cutting area 1
D : cover
E : lever cutting area 2
F : lever cutting area 3
G : display
Fig. 2 Fig. 3
A
A B
C
D
B D E F
G
C