Manuel PLIMOA
15
Walking Aid:
In Assist 1, a long press on the "-" minus button triggers the walking aid and allows the Ebike
to start without pedalling.
Display mode:
A short press of the ON / OFF button changes the screen display.
night mode
(Light): A long press "
+
"
turns on or off the backlight of the screen and the front and rear lights.
Switching from ODO info to TRIP info:
One quick press on the
“
M
”
(MODE)
button allows you to switch
between the two. ODO shows the total number of kilometres travelled since the bike was first used. TRIP
shows the number of kilometres travelled on your current journey.
Resetting the route information
(km travelled, average speed, max speed): When TRIP mode is selected.
A long press on DOWN and MODE simultaneously resets the trip data.
Travel time:
A short press of the "M" (MODE) button to select the data to display: TRIP / ODO / RANGE /
TIME / POWER. "Time" to display your current journey time.
3.4 The electric assistance:
3.4.1 operation:
Your bike is an electrically assisted cycle: it is equipped with an electric motor located in the rear wheel. This
motor starts automatically (if it is turned on and the battery is charged) when, and only when, you pedal.
(except with the walking assistance).
Power assistance is initiated by an electromagnetic detector, which cuts off the motor's power supply as soon
as you stop pedalling.
The motor also stops:
•
When you activate one of the two brakes;
•
When you have reached the speed limit of 25 km/h.
This principle enables the motor to give you its full power when you need it and to save battery power when
you are going downhill, or on flat ground.
