KALYSO – KALYSO HY – KALYSO NV manual
19
4.2
Battery
Your battery has a serial number. This can be found either under the battery or in the indent of the black
part.
Your battery is assembled in a special container. We strongly recommend that you do not attempt to open or
disassemble it.
Any breaking of the warranty label will automatically render the warranty null and
void.
To remove the battery from its housing, you must open the lock using the key for this. Using the handle,
remove the battery from the back of the e-bike.
When replacing the battery, be sure that it is in the correct position to slide back into the rack’s “rails”.
You can charge your battery while it is on the bike (switch the key to OFF beforehand) or remove it from its
holder and then charge it, always using the plug located at the back of it.
For safe charging, first connect the charger to the battery and then connect the charger's standard plug to the
mains (220V/50 Hz).
Check that the charger is working correctly (see section 4.1).
Battery lock
Warranty label
Battery registration label
